Accueil
airsoft batterie
Valken 11.1v 1200mAh Stick Lipo Battery (Standard) – Airsoft Atlanta

Valken 11.1v 1200mAh Stick Lipo Battery (Standard) – Airsoft Atlanta

4.5 (683) · € 14.50 · En Stock

Valken 11.1v 1200mAh Stick Lipo Battery (LiPo). Should fit in most crane rear stocks for the M4. Probably fits in a lot of other guns too. This is a Tamiya style connector. This is for factory style mini-Tamiya plugs (99% airsoft guns use a Tamiya). This is for factory style mini-Tamiya plugs. If you're not sure which one to buy, get the Tamiya plug. This battery is very thin and tiny! Requires LiPo specific charger. Charge into 4-prong balance plug ONLY (not in the Tamiya output connector!) with LiPo charger, in a safety bag only. Dimensions: 122mm long x 20.5mm wide x 18mm thick in size. **NOTE: These batteries have been changed to a 30c rating and are no longer 20c as displayed in the photos.   Lipo Safety Information: LiPo batteries can carry risk, so please use with caution.
Valken 11.1v 1200mAh Stick Lipo Battery (LiPo). Should fit in most crane rear stocks for the M4. Probably fits in a lot of other guns too. This is a Tamiya style connector. This is for factory style mini-Tamiya plugs (99% airsoft guns use a Tamiya). This is for factory style mini-Tamiya plugs. If you're not sure which one to buy, get the Tamiya plug.This battery is very thin and tiny! Requires LiPo specific charger. Charge into 4-prong balance plug ONLY (not in the Tamiya output connector!) with LiPo charger, in a safety bag only.Dimensions: 122mm long x 20.5mm wide x 18mm thick in size. **NOTE: These batteries have been changed to a 30c rating and are no longer 20c as displayed in the photos.  Lipo Safety Information:LiPo batteries can carry risk, so please use with caution. LiPo are hobby-grade products and not consumer grade. Please read your battery charger instructions, use correct LiPo approved charger/battery, and follow proper precautions. Never charge/discharge/use/store damaged or puffy batteries. Dispose of faulty batteries at local facility (Home Depot, battery shop, recycling center, etc). Use proper LiPo charger only! Do not charge on a nimh charger. Use the 3 or 4 pin balancer plug only to charge through. The Tamiya/Deans plug is output only. Do not charge into the output plug. Only charge on the balancer port with a LiPo charger.Charge your LiPo in an approved safety LiPo bag, concrete, metal surface/box (an ammo can is great), ceramic coffee mug, or fire-proof surface only. Keep away from fire hazards, paper, wood, etc. Never charge your LiPo unattended. Always be nearby when charging. If you have to leave, unplug from charger and wall outlet. Unplug your battery and charger when not in use or present. Store in a fireproof container, unplugged. Do not leave it plugged into your gun when in storage. Never leave charger plugged into wall outlet when not in use. Do not overcharge or discharge your LiPo too much. Either will cause damage to its cells. Never store a fully charged battery. Discharge to a safe level 3.6v or so. Store at room temperatures, never cold or hot environments. LiPo batteries are generally good for 300 charge/discharge cycles over its lifetime. Follow proper shipping regulations when transporting, traveling, etc.
Valken 11.1v 1200mAh Stick Lipo Battery (LiPo). Should fit in most crane rear stocks for the M4. Probably fits in a lot of other guns too. This is a Tamiya style connector. This is for factory style mini-Tamiya plugs (99% airsoft guns use a Tamiya). This is for factory style mini-Tamiya plugs. If you're not sure which one to buy, get the Tamiya plug. This battery is very thin and tiny! Requires LiPo specific charger. Charge into 4-prong balance plug ONLY (not in the Tamiya output connector!) with LiPo charger, in a safety bag only. Dimensions: 122mm long x 20.5mm wide x 18mm thick in size. **NOTE: These batteries have been changed to a 30c rating and are no longer 20c as displayed in the photos.   Lipo Safety Information: LiPo batteries can carry risk, so please use with caution. LiPo are hobby-grade products and not consumer grade. Please read your battery charger instructions, use correct LiPo approved charger/battery, and follow proper precautions. Never charge/discharge/use/store damaged or puffy batteries. Dispose of faulty batteries at local facility (Home Depot, battery shop, recycling center, etc). Use proper LiPo charger only! Do not charge on a nimh charger. Use the 3 or 4 pin balancer plug only to charge through. The Tamiya/Deans plug is output only. Do not charge into the output plug. Only charge on the balancer port with a LiPo charger. Charge your LiPo in an approved safety LiPo bag, concrete, metal surface/box (an ammo can is great), ceramic coffee mug, or fire-proof surface only. Keep away from fire hazards, paper, wood, etc. Never charge your LiPo unattended. Always be nearby when charging. If you have to leave, unplug from charger and wall outlet. Unplug your battery and charger when not in use or present. Store in a fireproof container, unplugged. Do not leave it plugged into your gun when in storage. Never leave charger plugged into wall outlet when not in use. Do not overcharge or discharge your LiPo too much. Either will cause damage to its cells. Never store a fully charged battery. Discharge to a safe level 3.6v or so. Store at room temperatures, never cold or hot environments. LiPo batteries are generally good for 300 charge/discharge cycles over its lifetime. Follow proper shipping regulations when transporting, traveling, etc.