Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed
4.8 (217) · € 1.00 · En Stock
About the product: Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans. In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the
About the product:
- Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
- In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
- There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the source fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
-
Package content: 1 x 12V 10 way 4-pin ide fan governor, 1x PWM connecting cable.
Description:
- Fan interface: IDE interface, support 3/4 pin
- Product size: 7*4.6cm/2.7*in
- Rated voltage: 12V
- Product model: temperature control 4-pin hub
- Scope of application: motherboard 4-pin interface
- PWM cable length: 40cm/15.7in
- 7.PWM is connected to the motherboard FAN CPU interface through the PWM CONNECTION cable,
- 8. The red interface is the specific interface of the CPU fan, and the black interface is the standard PWM fan interface.
- 9. There is a double-sided EVA adhesive on the back, which can fix the hub in the computer case.
Note:
- 1. The red port must be plugged into a fan first. Pull one end of the PWM cable and plug it into the CPU_FAN interface on the motherboard.
1 to 10 4Pin PWM Cooling Fans HUB PC Large 4D Port Power Speed
EN-Labs PC Case PWM 4 Pin Fan Hub, 1 to 10 4Pin/3Pin Chassis Cooler Splitter - CPU Cooling 10 Port 12V Molex IDE to Fan-Header with 4 Pin PWM
NOYITO 10-Channel PC Fan PWM HUB SATA Port Power
Product Name: PC FAN PWM HUB. The main function: to expand the 10-channel 4-pin fan interface to solve the problem of insufficient number of
NOYITO 10-Channel PC Fan PWM HUB SATA Port Power Supply Maximum Support 10-Channel PWM Fan Temperature Control Suitable for Motherboard 3Pin 4Pin Fan
,aspect=fit)
CPU Fan Controller in Pondicherry - Dealers, Manufacturers
EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan Power Splitter Adapter Cable w/ Self-sticker for 3Pin / 4Pin fan
JEYI ARGB PWM 2-in-1 5 way hub support up to 5 sets of Addressable 5V RGB headers and 12V PWM headers. Add 1 CPU PWM signal fan. This CPU Cooling fan
JEYI ARGB PWM 5 Way Fan Hub, Addressable 12V 4Pin PWM & 5V 3Pin ARGB 2-in-1 Hub, RGB Fan, RGB Strip Splitter
BUYMINERS.CA Chassis Fan Hub CPU Cooling 10 Port 12 V
10-Port PWM Fan Hub, Splitter for 4-Pin & 3-Pin Fans – EZDIY-FAB
【Function】PC 8 Channels Fan Hub Reduce speed to reduce noise & power consumption when computer parts are free. Increase speed to reduce computer part
SinLoon 4 Knob Cooling Fan Speed Controller PC 8 Channels Fan Hub for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- 4Pin Interface Power
