Accueil
bambulab pei
XTR Powder Painted PEI Flexi Plate - 258 x 258 - Bambu Lab X1, X1

XTR Powder Painted PEI Flexi Plate - 258 x 258 - Bambu Lab X1, X1

4.9 (747) · € 27.00 · En Stock

Size: 258 x 258 mm / 10.15" x 10.15" *Fits: Bambu Lab A1, X1, X1 Carbon (or X1C), X1E, P1P, and P1PS *May fit: Two Trees SK1 (exact fit but without alignment tab) We start with our thicker (0.6 mm) XTR, high-chromium spring steel Flexi Plates, powder paint them with Ultem brand PEI coating and bake them in a kiln. Th
Size: 258 x 258 mm / 10.15 x 10.15 *Fits: Bambu Lab A1, X1, X1 Carbon (or X1C), X1E, P1P, and P1PS *May fit: Two Trees SK1 (exact fit but without alignment tab) We start with our thicker (0.6 mm) XTR, high-chromium spring steel Flexi Plates, powder paint them with Ultem brand PEI coating and bake them in a kiln. The PEI Powder Painted Flexi Sheets have a pronounced texture and give the bottom of your part a fantastic finish! The plates are coated on both sides, so you can save one side for pristine parts while you abuse the other side. Works perfectly with your Wham Bam magnetic base, not included. Works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use purple glue sticks or Magigoo, they will wash off with water after use. To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature. *Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes. **It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

Bambu Textured PEI Plate

TM-FLEX Double Sided Textured/Powder Coated PEI Build Plate for Bambu

RETUXEP PEY PEI Build Plate for Bambu Lab X1

368 x 217 - Peopoly Phenom L and EPAX X156 – Wham Bam Systems

Wham Bam 258 x 258 Flexi Plate with Pre-Installed PEX Build

For Bambu lab x1 Build Plate PEI PET PEO 257x257mm Upgrade Double

HoneyBadger Textured & Smooth PEI for Bambu Labs X1 & X1C – Fabreeko

Size: 258 x 230 mm / 10.2 x 9 fits: Ultimaker S2/S2+/S3 and Eryone ER 20 The Wham Bam Flexi Plate is made from high-quality flexible spring steel designed to be bent thousands of times without kinking. The spring alloy contains a high level of chromium to ensure no rust or oxidation for its lifetime. The Flexi Plate is 0.4mm thick. Build surface sold separately.

Flexi Plate Only (No Build Surface) - 258 x 230 (Cut Out Corners) - Ultimaker S3 and ERYONE ER 20

RETUXEP 3D Printer PEI Build Plate 257x257mm Double

IdeaFormer-3D Rainbow PEY+Textured PEI Build Plate for

Stop working with resin on cardboard and paper towels, throwing away a toxic gooey mess after every clean-up or resin transfer. Use Slap Mat to protect your work surface, spill and splash all you like and when you are done, take it outside. The resin will harden, and with a simple flex, it pops right off to be safely and easily disposed of. Use under each of your printers as a catch-all.