Accueil
tormek
Tormek T-8 Sharpening System Rockler Woodworking and Hardware

Tormek T-8 Sharpening System Rockler Woodworking and Hardware

4.8 (768) · € 16.50 · En Stock

TORMEK Sharpening System Hand Tool Bundle Tbh801 T-8 A Complete Water Cooled Sharpener with Hand Tool Sharpening Jigs

How to Cut Mortises and Sharpen Mortising Chisels Chris Marshall talks about the technique of cutting mortises, using mortising chisels and how to keep them sharp with the Tormek T-4 Sharpening

Puts the maximum sharpness on all sizes of scissors and shears. The jig for scissors sharpening comprises a support plate and a holder with

Scissors Jig SVX-150 for Tormek Sharpening Systems

Tormek SVD-110 Tool Rest with Torlock is used for turning scrapers, hollowing tools and thin parting tools. It can also be used for cabinet scrapers, screw drivers and spoke shave blades. It features a fast and secure locking on the Universal Support due to the patented wedge shaped design, which increases the locking force by 250 percent. It has a generous surface, 3-1/2-inch x 4-1/2-inch, which permits a safe and steady positioning of the tool towards the stone.

Tormek svd-110 Tool Rest

The Tormek T-8 Custom has all the features and quality of the standard T-8, but without any wheels or jigs. This lets you purchase only the jigs and wheels that you need in your work, resulting in a sharpening machine that's customized for you. The T-8 features a fully cast housing for rigidity and minimal play on the universal support. Its large water trough features a geared lift mechanism that raises and lowers the water trough with minimal splashing.

Tormek Sharpening T-8 Custom

The Tormek diamond wheel coarse has a grit size of 360 for fast steel removal when shaping and a rapid repair of a dull or damaged edge. You can sharpen all types of material, including steel, ceramic, and carbide. Fits Tormek T-8, Tormek T-7, and previous models with a 250 mm (10 In.) stone diameter. Included with every diamond wheel is 150 mL of ACC-150 anti corrosion concentrate. Always use the concentrate when sharpening with water to prevent rust on the grinding wheel.

Tormek 10 in. Diamond Wheel Coarse, 360 Grit

Tormek T-8 Custom - Create Your Own Water Cooled Sharpening System - Add Your Choice of Grinding Wheel and Honing Wheel (not included) - US Version - English Handbook

Tormek T-4 Sharpening System Rockler Woodworking and Hardware

The jig 1 comprises an upper base with a lower clamp and two locking knobs for fixing the tool. The jig slides on the Universal Support on nylon bushings across the grindstone. The edge angle is set with the Micro Adjust 4 on the Universal Support 5. There are two safety stops to prevent the tool from slipping off the stone when grinding. One inner stop 2 to be positioned according to the width of the tool and one outer stop 3 mounted on the end of the Universal Support.

Tormek Axe Jig

Tormek T-8 water cooled sharpening system

Tormek T-8 Sharpening System

With the Stone Grader SP-650 you can change the grit size of the Tormek original grindstone to give a finer sharpening surface. The other side of the Stone grader is used to maintain the grindstone, bringing new abrasive grains to the surface for an effective sharpening. The Tormek Original Grindstone is designed so that it can be treated with the Stone Grader to change its quality from fast grinding to fine sharpening. This has obvious advantages.