Boron Nitride Thermal Paste for 3D Printers

4.5 (664) · € 4.50 · En Stock

Boron Nitride Thermal Paste for 3D Printers | Shop Partsbuilt 3D for high quality 3D printing supplies
Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried. Includes: Boron Nitride paste (1 pcs)Applicators (3 pcs) Features:Use in most hotends1000°c working temperatureHigh thermal conductivity - 30+ W/mKWater based - no VOCsImproves efficiency of your hotendIncreases heat dissipation from the heater cartridge and heat breakIncreases heat transfer to the thermistor and nozzleHelps with heater cartridge removal from the heater blockNot electrically conductive, no risk of shortingMade in the USA Directions: Cartridges (thermistor & heater): Coat the cartridge and hole in your 3D printer heater block. Insert the cartridge while the paste is still wet. Let the paste dry before heating up your hotend. Nozzles:Only use a small amount on the threads of the nozzle (do not apply the BN paste to the threads of the heater block), install the nozzle while the paste is wet and let dry before heating. Heat Break:Coat the exterior of the heat break with BN paste, install into the heatsink while the paste is wet and let dry before heating.

Boron Nitride Paste (5 cc) by Slice Engineering, Improve Conductive Heat Transfer, Maintain Stable Temperatures, 3D Printing, Thermowells, RTD Sensors, Thermistors, Thermocouples