Scotch-Brite™ Metal Finishing Convolute Wheel

4.9 (140) · € 29.99 · En Stock

Scotch-Brite™ Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.

Scotch-Brite™ Multi-Finishing Convolute Wheel

The Scotch-Brite Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discoloration and warping while extending the life of the wheel. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.The Scotch-Brite Multi-Finishing Wheel uses silicon carbide abrasive.

Scotch-Brite MU-WL Multi-Finishing Wheel, 4x3x1, 2S M

3M 7100000490 - High conformability and uniform wear provides consistent cutting power to produce superior satin, mill and brushed finishes. Open-web

3M Scotch-Brite™ Metal Finishing Convolute Wheel, MF-WL, 5A Medium, 8 in x 1 in x 3 in - 7100000490

Scotch-Brite Multi-Finishing Wheel, Silicon Carbide, 6000 rpm, 6 Diameter x 1 Width, 1 Arbor, Coarse Grit (Pack of 1) : Industrial & Scientific

Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites Tough, layered,

Cubitron II Scotch-Brite EXL Deburring Wheel - 8S Fine Grit Silicon Carbide - Metal Deburring, Finishing and Polishing Wheel - Convolute - 6' x 1' x

3M Scotch-brite™ 7S Fin Light Deburring Wheel Fine Silicon Carbide 6 X1x1 LD-WL - Norway

Scotch-Brite™ EXL Deburring Wheel, 6 in x 1/2 in x 1 in, 8S FIN, 4 per case 7000136514

Scotch-Brite™ 048011-01666

3M Deburring Wheel 8A MED 6x1x1 Scotch-Brite™ EXL Medium Grade Hard Density

Norton Abrasives 66261010148 Norton Metal Finishing Wheel 6 x 1 x 1 A/O Medium 6 DensityMade from non-woven synthetic fiber mesh, which is impregnated with abrasives and bound with resins, non-woven wheels are designed to create desired surface finish where little or no stock removal is required. Non-woven wheels have an open mesh construction that is waterproof, washable, conformable and non-loading.