Câble ,USB-RS232 Convertisseur

4.7 (138) · € 20.00 · En Stock

EC Buying USB 2.0 to Serial 9-Pin RS232 Serial Adapter, DB-9 USB to Serial RS232 Converter Cable, USB 9-Pin Serial Cable, Serial to USB Adapter Support Windows 7/8/10/11/32/64/XP/RS232 to USB

Gold Plated USB 2.0 Male to RS232 Female DB9 Serial Cable connects a serial DB9 (9 PIN) device, such as a modem, to a USB port on your computer. USB port with 1Mbps data transfer rate. | Latest Prolific PL2303 chipset. supports Windows 10/8.1/8/7/Vista/XP//2000 /Linux 2.4 or above, Mac OS X 10.6 and above; drivers can be downloaded at cablecreation website.

USB to RS232 Adapter with FTDI Chipset CableCreation 3.3 ft USB 2.0 to RS232 Female DB9 Serial Converter Cable for Windows 10 8.1 8 7 Vista XP

Cable Matters : Electronics

USB RS232 Cables

USB to RS232 Adapter / USB to RS232 Converter

USB To RS232 Conversion Cable at Rs 700, USB Serial Barcode Converter in Chennai

Connecting USB with the traditional RS-232 serial port, this adapter connects cellphones, PDAs, digital cameras, modems, or ISDN terminal adapters through your USB port. Has a data transfer rate of over 230 kbps. Since the adapter uses no IRQs, there are no IRQ conflicts, and it is ideal for when you need many serial devices attached to your PC. Frees your RS-232 port for other uses.

Cables To Go 26886 1.5 Feet USB To DB9 Male Serial Adapter - Blue

rs232c usb converter,CableCreation USB to RS232 Adapter Built-in PL2303 chipset Gold plated USB 2.0 (male) - RS232 (male) DB9 pin serial conversion adapter Windows 10 / 8.1 / 8 / 7 / Vista / XP / 20

USB 2.0 to Serial 9-Pin RS232 Serial Adapter, DB-9 USB to Serial RS232 Converter Cable, USB 9-Pin Serial

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36 cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.