• Accueil
• 12v poe switch
• IPCamPower POE to 12V DC Converter with Wireless Receiver for POE Lighting (IPCP-WIPOERECEIVER)

IPCamPower POE to 12V DC Converter with Wireless Receiver for POE Lighting (IPCP-WIPOERECEIVER)

4.7 (741) · € 13.50 · En Stock

* Takes Incoming POE Power and Converts and Outputs 12V DC Power. Can be used with any standard POE Switch or POE NVR. Requires minimum of 15 Watts

IPCamPower POE to 12V DC Converter with Wireless Receiver for POE Ligh

Smart PoE UPS

High Power PoE++ Injector & Splitter Device Pair for IP PTZ Speed

Wirepath™ Surveillance 12V DC Power Supply with PTC Fuses

Takes Incoming POE Power and Converts and Outputs 12V DC Power. Can be used with any standard POE Switch or POE NVR. Requires minimum of 15 Watts POE

IPCamPower POE to 12V DC Converter with Wireless Receiver for POE Lighting IPCP-WIPOERECEIVER

Powerwalker DC SecureAdapter Extern Ström växelströmsjack 5,5 mm

POWER SUPPLY – UltraPoE

Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a sender unit and a receiver unit. Plug Sender

IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable, Works on All POE Switches, POE NVR and POE Cameras, Mode A and B POE Compatible

Extenders/Repeaters/Splitters — IPCamPower

Deploy remote non-PoE devices with no nearby AC outlets and upgrade them to PoE from up to 400 feet. 2.1mm x 5.5mm 12V DC barrel jack for IP camera,

UCTRONICS Active PoE Splitter 12V - 2.1mm DC Barrel Jack for IP Camera, Arduino with Ethernet and Wireless Access Point - IEEE 802.3af/at Compliant

Smart Ethernet Box

Wirepath™ Surveillance 12V DC Power Supply with PTC Fuses

ANVISION 4-Pack 12V DC Output Active PoE Splitter