DimaFix - 3D Print Bed Adhesive - Glue

4.6 (80) · € 9.50 · En Stock

DimaFix Pen - 3D Printer Bed Glue | Fast Shipping in the US from Partsbuilt 3D
DimaFix Pen The DimaFix Pen provides an easy way to obtain the print bed adhesion you need. When heated above 60ºC, DimaFix provides a strong bond between your first layer and the build plate. DimaFix becomes inactive when cooled below 60ºC, so objects can easily be detached from the plate. Size: 90ml Includes: DimaFix (1 bottle) Works with: ABS, PLA, PETG, HIPS, ASA, TPU Features of the DimaFix Pen:Completely water soluble for easy clean upSuitable for most filament types 0 - 60c: no adhesion, object can easily be detached from the plate60-75c: average adherence for simple geometries75-95c: high adherence, for complex geometries and lengthy printsOver 95c: very high adherence, for very complex geometries and lengthy prints WARNING Do not squeeze the bottle to avoid applicator popping off.Keep the area around the applicator clean (with a damp cloth) so it does not come off inside the cap. Application:Shake the bottle.Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.Print according to the filament/printer manufacturers recommendations. Print Removal:The part should self-release or become easier to remove on cooling, in most cases the part can be directly lifted off from theplate.If the part cannot be easily removed by hand, a part removal tool can be used to gently lift the part off the build-plate.When using a brim, it is advisable to first peel off the brim around the part and then attempt to remove the print. MSDSTDS