E3D HARDENED STEEL 0.4MM - 2.85

4.6 (285) · € 11.50 · En Stock

Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.

MK8 Hardened Steel Nozzle [ 0.4 / 0.6 / 0.8 / 1.0mm ]

Orifice size 0.4mm Nozzle Detail: Hardened Steel Nozzle, Wear Resistant, Abrasion Resistant, Corrosion Resistant Thread: M6, Filament size: 1.75mm

GO-3D MK8 0.4mm Hardened Steel Nozzle for M6 Thread 3D Printers

The Nozzle X is a ‘One to rule them all’ nozzle, made from a special alloy of tool steel, creating a nozzle that is immensely hard, but also maintains its hardness at high temperatures without softening. Coating A layer of hard, slick nickel plating has also been added which provides a fantastic balance of cost and wear resistance. The cherry on the top? A WS2 ‘polyphobic’ nano coating - no longer will you find hot molten polymers sticking to your nozzle.