FEP/PTFE (standard wall) Dual Shrink tubing

4.6 (509) · € 14.00 · En Stock

FEP/PTFE Dual Shrink Heat Shrinkable Tubing NOTE - Due to extreme instability in the PTFE market, prices are subject to change without notice. Lead times can be up to 10 weeks. Features  Continuous operating temperature -454°F to 500°F (-270°C to 260°C) Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride). FDA and USP Class VI approved Very low coefficient of friction Good dielectric strength Flame rating UL94 V0 and VW-1 Limiting Oxygen Index greater than 95 ETO and autoclave sterilizable Mil spec approved (AMS-DTL-23052/12)
FEP/PTFE Dual Shrink Heat Shrinkable Tubing PTFE heat shrink tubing has a very high continuous use temperature (260°C), and outstanding chemical resistance. Combining this with a lower melt temperature material (FEP) on the inside makes the only high temperature adhesive lined heat shrink tubing on the market. It is available in 2:1 shrink ratio, and meets or exceeds the most stringent commercial (UL VW-1, UL 910, NFPA262) and military standards (AMS-DTL-23053/12). Features Continuous operating temperature -454°F to 500°F (-270°C to 260°C) Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride). FDA and USP Class VI approved Very low coefficient of friction Good dielectric strength Flame rating UL94 V0 and VW-1 Limiting Oxygen Index greater than 95 ETO and autoclave sterilizable Mil spec approved (AMS-DTL-23052/12)