Accueil
5 guitar wall mount
Mainstream Source® Large Guitar Hanger Cradle and Guitar Wall Mount Bracket Holder for Acoustic and Electric Guitars, Sturdy, Secure, Self-Closing, Pressure-Release (Rosewood)

Mainstream Source® Large Guitar Hanger Cradle and Guitar Wall Mount Bracket Holder for Acoustic and Electric Guitars, Sturdy, Secure, Self-Closing, Pressure-Release (Rosewood)

4.8 (374) · € 11.99 · En Stock

Arrives by Mon, Feb 12 Buy Mainstream Source® Large Guitar Hanger Cradle and Guitar Wall Mount Bracket Holder for Acoustic and Electric Guitars, Sturdy, Secure, Self-Closing, Pressure-Release (Rosewood) at
Our sturdy hardwood wall plate and cradle design is beautiful, secure and perfect for your prized instrument! INSTALLATION INSTRUCTIONS: After you choose a location on the wall for your hanger, guide the screws through the mounting holes of the hardwood block. Drive the screws into the wall using a Phillips screwdriver. If you cannot locate a wall stud, use the mounting holes as pilot holes to install the drywall anchors. The drywall anchors can be installed by using the screwdriver to push and turn them clockwise until they are flush with the wall. You can then remount the hanger into the drywall anchors with the screws. Alternatively, toggle bolts can be purchased and used for heavier instruments on drywall with no studs. PLEASE NOTE:Weight limit for this guitar hanger is 15 pounds or less. Please DO NOT REUSE drywall anchors to remount the guitar cradle. ASSEMBLY INSTRUCTIONS: Insert the long black plastic washer onto the screw of the yoke cradle, flat side towards the wall.Insert the yoke cradle into the threaded hole of the hardwood block. Turn it clockwise until snug and the tips of the yoke arms are pointing upward. MOUNTING HARDWARE INCLUDED