There is no need to run AC power lines for your wireless access point, network camera, or IP phone.

There is no need to run AC power lines for your wireless access point, network camera, or IP phone. Simply connect the PoE Injector to the LAN switch port and use the existing Cat5 cabling to provide DC power as well as transfer data. The PoE Injector 1 48 VDC port allows you to connect IEEE 802.3af compliant products to a non-PoE LAN switch port. The PoE Injector is designed to protect equipment against short circuits (short GRND), current overloads (above 450 mA) and high voltages (voltage over 52 V).

- Save on installation and equipment costs
- Ideal for use with access points and IP cameras. Delivers power up to 100 meters (328 feet)
- Auto-detects the required power supply
- Plug and Play, no configuration required
- Expands network to areas with no power lines or outlets
- It has 1 PoE port
- Powers PoE devices up to 15.4 W
- Detects whether the connected equipment is PoE and its class, and does not damage non-PoE equipment
- Can be connected in 10/100 Mbps or 10/100/1000 Mbps Switch
- LED for easy diagnosis
- Operates in temperatures from -10C to 40C
- Power supply for operation with voltages from 100 to 240 VAC - 60Hz with automatic switching

There is no need to run AC power lines for your wireless access point, network camera, or IP phone. Simply connect the PoE Injector to the LAN switch port and use the existing Cat5 cabling to provide DC power as well as transfer data. The PoE Injector 1 48 VDC port allows you to connect IEEE 802.3af compliant products to a non-PoE LAN switch port. The PoE Injector is designed to protect equipment against short circuits (short GRND), current overloads (above 450 mA) and high voltages (voltage over 52 V).- Save on installation and equipment costs- Ideal for use with access points and IP cameras. Delivers power up to 100 meters (328 feet)- Auto-detects the required power supply- Plug and Play, no configuration required- Expands network to areas with no power lines or outlets- It has 1 PoE port - Powers PoE devices up to 15.4 W - Detects whether the connected equipment is PoE and its class, and does not damage non-PoE equipment - Can be connected in 10/100 Mbps or 10/100/1000 Mbps Switch - LED for easy diagnosis - Operates in temperatures from -10C to 40C - Power supply for operation with voltages from 100 to 240 VAC - 60Hz with automatic switching

Intellinet 508988 Industrial Gigabit Media Converter and PoE+ Injector

Gigabit POE Injector, 48V 15.4W Power Over Ethernet, IEEE 802.3af Compliant, 10/100/1000Mbps, Compatible for TP-Link TL-POE150S, TRENnet TPE-113GI : Electronics

There is no need to run AC power lines for your wireless access point, network camera, or IP phone. Simply connect the PoE Injector to the LAN switch

D-NET Power Over Ethernet (PoE) Injector, Powers Devices up to 100 M (328 Ft.), 15.4 Watts (DN-POE-1001)

PoE Texas Power over Ethernet

PoE Texas Power over Ethernet

Power Over Ethernet (POE) Devices – Tagged Fiber Optic Ports_SFP – HardboxUSA

The PoE 1001-60W Injector is fully IEEE 802.3af compliant and can work with all standard IEEE 802.3af PoE devices (Power Devices) or adapters.

D-NET Power Over Ethernet (PoE) Injector, Powers Devices up to 100 M (328 Ft.), 60 Watts (DN-POE-1001-60W)

Build-in detection chip inside,which will detect and classify PD before powering it(Active PoE),Protection of non-standard devices UL SAA PSE BIS CE

Procet Single Port Gigabit Power Over Ethernet Active PoE Injector 60W POE Midspan 55V, IEEE802.3af,IEEE802.3at,PoE++, for IP Camera , Access Point

Gigabit POE Injector, 48V 15.4W Power Over Ethernet, IEEE 802.3af Compliant, 10/100/1000Mbps, Compatible for TP-Link TL-POE150S, TRENnet TPE-113GI : Electronics

Industrial GbE Media Converter & PoE+ Injector (508988)

PoE Texas Power over Ethernet