PoE Adapters for Non-PoE IP Cameras

5 (726) · € 6.50 · En Stock

These small adapters will allow you to turn your IP cameras that are not PoE in to PoE IP cameras so you can send data/power over a single network cable. Simply connect the adapters to each end of the cable, and to your IP security camera. On the power en
CCTV Camera World is a direct supplier of security cameras and IP PoE camera systems backed by expert technical support. Call (877) 522-8836 today.
These small adapters will allow you to turn your IP cameras that are not PoE in to PoE IP cameras so you can send data/power over a single network cable. Simply connect the adapters to each end of the cable, and to your IP security camera. On the power end, connect a 12VDC power adapter to the female power jack, and the network connector to your router or switch. We recommend you don't use a PoE switch with this setup. You should be using a 12V DC 2amp Power adapter with these. The current output on the other end, depends on the gauge and whether your network wire is full copper or CCA. Here's a list of cameras from CCTV Camera World that you will need these connectors with: 5 Megapixel IP Camera, 300ft IR Night Vision Onvif, 5MPBC6 5 Megapixel IP Camera 300ft IR Night Vision Onvif Compatible, 5MPBC8 Here's a diagram of how it all works: Don't forget to watch the video below to learn more about how you can use these adapters even with PTZ cameras. What's Included? (1 Pair) Passive PoE Power Adapters Please note the color of the adaptor varies with the stock we have. They may be white or black in color depending on what we have in stock.

3 Things to Know About Using a Power-over-Ethernet (PoE) IP Security Camera

Utilize Power over Ethernet with PoE Injector - FASTCABLING

SPE Redefines PoE

Send IP Camera Signal, Transmission up to 984', RJ45 and BNC Connection Terminations, Support 10/100 MB/s Transmission Rate. This Triplett POE-1TR IP Extender over Coax pair is a low cost easy and speedy solution that allows you to use existing coax cable to send an IP camera signal. The extender has a 984' transmission range.It has RJ45 and BNC connections and supports 10/100 MB/s transmission rate.The unit is passive with no power required.