Accueil
câble rca jack audio
Turntable Cable RCA to RCA with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC.

Turntable Cable RCA to RCA with Ground Lugs — AMERICAN RECORDER TECHNOLOGIES, INC.

5 (209) · € 11.99 · En Stock

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low noise level. Cables are hand terminated with high content silver solder. In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire exte

In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6 at each end of the cable to ensure an easy connection to a chassis ground screw. Durable and supple outer PVC jacket allows for easy cable connection and long cable life.

This version has left and right RCA plugs at both ends as well as a ground lug connection

Available in a variety of lengths and with nickel or gold plated RCA connectors

CABLE LENGTHS

1 meter (3.3 ft)
1.5 meter (4.95 ft)
2 meter (6.6 ft)
3 meter (9.9 ft)
4 meter (13.2 ft)

FYI - Turntables use a magnetic cartridge and stylus to pick up the sound from the record groove. The signal level from the magnetic cartridge is very low and must be connected to audio equipment with a PHONO level input. When connecting a turntable to audio equipment without a phono input, an AMERICAN RECORDER VDC-141 PHONO PREAMP can be used, allowing connection to any line level input (CD, DVD, TAPE, etc.).

AMERICAN RECORDER Turntable Cable with Ground Terminal - RCA to Bare End - 1 Meter (3.3 feet) : Electronics

Audio Technica AT-LP1240-USB XP Turntables & Cases

Turntable Cable RCA to RCA with Ground Lugs

AMERICAN RECORDER RCA to RCA Turntable Cable - RCA to BARE END / 2 meter (6.6 ft)

Z100AM15FT - Liberty Z100 3.5mm TRS Stereo Audio Cable

Audio-Technica AT-LP140XP-BK Black Direct-Drive Professional DJ Turntable The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminum platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica AT-LP1240-USB XP Direct Drive Professional DJ Turntable

Analog Corner #77

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low