SUNLU PETG Grey 175mm 3D Printer Filament 1kg

4.7 (365) · € 8.50 · En Stock

Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
Tangle Free & No Plugging Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.High Precision +/- 0.02mm Tolerance 1.75mm PETG 3D filament(Tolerance Level : ? 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.Rigid, Tough, High Performance 3D Printing Material 3d filament PETG 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60?C(140?F).Recommended Printing Temp/Nozzle Temperature PETG 3d filament suggest printing temperature is 220-250?C - Base Plate Temperature: 70-80?C if no glue applied.99% FDM 3D Printer High Compatibility Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.SUNLU PETG 3D Printer FilamentSUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.FAQWhy can't the filaments stick to the hotbed easy?1). Check the temperature setting before printing, PETG filament temperature about 220-250;2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;