Capricorn 1 Meter TL Translucent 1.75mm Bowden Tubing –
4.7 (140) · € 4.99 · En Stock
One Meter of Capricorn's excellent quality translucent blue tubing. 2mm inner, 4mm outer diameter for 1.75mm filaments. This blue translucent tubing is produced from the finest pure virgin transparent PTFE. Guarantee to always be the right diameter and perfectly round. Each meter of tubing comes with one Capricorn stic
One Meter of Capricorn's excellent quality translucent blue tubing. 2mm inner, 4mm outer diameter for 1.75mm filaments.
This blue translucent tubing is produced from the finest pure virgin transparent PTFE. Guarantee to always be the right diameter and perfectly round.
Each meter of tubing comes with one Capricorn sticker to decorate your printer.
Data Sheet
Premium TL Series Light Blue Tubing
Additives
Blue Color
Best For Chunky Filaments
YES
Best For Flexible Filaments
NO
Can See Through
YES
Pulling Friction♠
0.8
Color
Blue, Translucent
Density (kg/m3)
2100 +/-100
Hardness
55
Inner Diameter (mm)
2.05 +/- 0.05
Linear Thermal Expansion at 250 °C
3.4-3.6%
Material
Highest Quality Pure Virgin PTFE
Melting Point (°C)♥
around 300
Outer Diameter
3.95 +/- 0.05
Roundness (ϵ)
< 0.1
Stiffness§
Medium
Thermal Conductivity (W/m-k)
0.25
Wear Rate (gm/s)
0.01
Young's Modulus (GPa)¥
0.5
♠Pulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter.
§Other Bowden tubes may vary significantly in stiffness, depending on the material from which they're made. Our tubing generally tends to be more flexible than most, with the TL being more flexible than XS.
¥Young's Modulus (YM) is the measure of elasticity of the material. Our XS Series additives give the PTFE a slightly greater YM than the TL Series.
♥Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform. Printer failures may happen at significantly lower temperatures.
Printing high temperature materials may create dangerous off-gassing. Please refer to the Safety Page.
PTFE Bowden Tubes, 3D Printer Nozzle Feed
Capricorn TL Bowden Tubing 1.75mm – Printed Solid
Capricorn's excellent quality translucent PTFE tubing, 2mm inner, 4mm outer diamter for 1.75mm filaments., Produced from the finest pure virgin PTFE
Capricorn TL Translucent PTFE tubing for 1.75mm filament
Capricorn PTFE Tube vs standard PTFE tube
Capricorn TL Bowden Tubing 1.75mm – Printed Solid
Technical Specifications
Capricorn Bowden PTFE Tube XS
PTFE, or Polytetrafluoroethylene, is a synthetic polymer commonly used as a coating for non-stick pots and pans. It is the slipperiest substance known
Capricorn TL Bowden Tubing 1.75mm
One meter of our excellent quality translucent pink tubing. 2mm inner, 4mm outer diameter for 1.75mm filaments. This pink translucent tubing is
1 Meter TL Pink Translucent 1.75mm Bowden Tubing
CAPRICORN TL PTFE 1.75mm - 1M - Επαγγελματική 3D Εκτύπωση
Genuine Capricorn Bowden 3mm Tubing (1 meter) (M-BOWDEN-TUBING-PRO-300) : Industrial & Scientific
3DMakerWorld Capricorn XS Series Low Friction PTFE Bowden Tubing 2 Meters for 1.75mm Filament : Industrial & Scientific
Upgraded to a Capricorn tube and started having bad under extrusion issues. Pulled the Bowden tube out and saw this. Did I do something wrong ? : r/ender3
Capricorn TL Series PTFE Tubing 1.75mm – 3docity
