Accueil
waveshare
Waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122

Waveshare 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122

4.7 (764) · € 13.00 · En Stock

IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4

Waveshare E-Ink Display Hat V3.X for Raspberry Pi - 2.13inch - 250x122

2.13inch Flexible E-Paper E-Ink Display Module for Raspberry Pi Pico, 212×104, Black / White, SPI Botland - Robotic Shop

2.13inch 250X122 E-paper Eink Display Screen Module Breakout Shield HAT for RPI Raspberry Pi PICO W H WH RP2040 Expansion Board - AliExpress

2.13 Inch E-Ink Display HAT 250x122 E-Paper SPI InterfaceScreen for Raspberry Pi 4B 3B+ 3B Zero STM32 Jetson Nano for Arduino

Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color - Robotools

No backlight is required, and the display content of the last screen can be maintained for a long time after power off Low power consumption, only

waveshare 2.13“ e-Paper Display HAT for Raspberry Pi 250x122 Black/White E-Ink Screen SPI Interface Supports Partial Refresh Rev2.1

Waveshare 1.54 inch E-Paper Display Panel Module 200x200 Resolution 3.3V E-Ink

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for

waveshare for Raspberry Pi 4B 3B+3B 2B/Zero W Zero WH/Zero 2 W 2 WH/forArduino/STM32/Jetson Nano, 2.13inch E-Paper HAT 250x122 E-Ink Display Screen

Setting up Raspberry Pi Zero W with e-Ink hat - Coding Horror Discussion

2.13 Inch Touch E-Paper HAT 250×122 Display SPI Interface E-Ink for Raspberry Pi Zero 2 W / W / 1.3 Optional ABS Case

This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122

2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano