Buy XTC-3D by Smooth-On in Canada at low prices online. XTC-3D® High Performance 3D Print Coating XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. It does not melt plastic. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to Use: 1 oz covers 100+ square inches. 90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface: XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D® does not contain VOC's, phthalates or phosphates. Technical MSDS Package Contents: Part A and Part B XTC-3D Instructions Foam Brush 30mL plastic cup Stir stick. Free shipping in Canada on qualifying orders of 3D printer accessories.
3D Printing Finishing
Smooth-On: XTC-3D
How To: Easily Smooth and Finish 3D Prints with XTC-3D
Smooth-On XTC 3D Brush-On Coating - 3DJake Ireland
Hack: Smooth-On XTC-3d coating makes T-Glase transparent! - Coffee
Hands On With The XTC-3D Smoothing System « Fabbaloo
Smooth-On XTC-3D High-Performance 3D Print Coating
XTC-3D Smooth On High Performance 3D Print Coating 644g/24oz
How To Smooth PLA 3D Prints Using XTC-3D Inc Paint Video
